吸油煙機的內部電氣連接和氣流密封部位不宜經常拆洗。密封圈經常拆洗容易導致老化變形,油污容易進入器具電氣連接部位,影響其性能，降低吸油煙機的使用壽命。

　　The internal electrical connections and air hood seal not often wash. The sealing ring and often easily lead to deformation of aging oil easy to enter the electric appliance connecting parts, influence the safety performance, reduce the service life of the hood.

　　濟南排煙罩的清洗知識如下：

　　Smoke hood cleaning knowledge as follows:

　　(1)擰開固定網罩的螺釘。

　　(1) unscrew the screw of the fixed net cover.

　　(2)將取下的過濾網罩放在中性洗滌劑的溫水中浸泡5-10分鐘。

　　(2) remove the filter cover and soak it in the warm water of neutral detergent for 5-10 minutes.

　　(3)用軟的塑料刷子把過濾網孔隙中的污垢清洗干凈，再用干抹布擦干。

　　(3) clean the dirt in the pores of the filter net with soft plastic brush, and then dry with a dry cloth.

　　(4)按拆下前的樣子裝好過濾網罩。

　　(4) install the filter screen as before.

　　(5)安裝好以后，檢查器具的油路是否順暢和蝸殼上的密封圈是否能密封。

　　(5) after installation, check whether the oil circuit is smooth and the sealing ring on the spiral case can be sealed.

　　(6)請按說明書規定的周期進行清洗過濾網罩。

　　(6) clean the filter screen according to the period specified in the instruction.

　　廚房排煙罩的特點:

　　Features of kitchen hood:

　　1、隔油和隔煙吸味功能高達95%及70%,能有效解決空氣污染及墻壁污染的問題.濟南排煙罩清洗

　　1, oil separation and smoke smoke absorption function up to 95% and 70%, can effectively solve the air pollution and wall pollution problems. Ji'nan smoke hood cleaning

　　2、具備防火功能,使風喉能避免被火熱蔓延.

　　2, with fire protection, so that the wind and throat can avoid being hot spread

　　3、能降低爐具范圍溫度為廚師提供更有益的工作環境.

　　3 、 it can reduce the range and temperature of stoves, and provide more useful working environment for chefs

　　4、采用不銹鋼制造,外形美觀耐用,又因油污不易積聚.

　　4 、 made of stainless steel, the appearance is beautiful and durable, and it is not easy to accumulate because of oil pollution

　　我們用滿腔的熱情、無限的激情對待工作和客戶，濟南排煙罩愿意用勤奮的努力和您一起共鑄美好明天!

　　We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!

上一篇：通風管道的焊接工藝之九大步驟
下一篇：油煙凈化器電場模塊化設計的條件